exporting my project to PDF, I discovered that the numbering of tables and images is mixed up.
The numbers of the first tables in the document are 40, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62
With the numbering of images it is similar.
According to the explanation at https://www.helpandmanual.com/help/inde ... unters.htm ...
... number 40 for the first and number 50 for the second table must have been set somewhere, right?Every time Help+Manual encounters the variable in a project it increases its value by 1. This means if you want to start with 1 you must enter "0" as the variable's initial value when you define it. If you want to start with 10 you must enter "9" and so on (without the quotes).
1.Define a text variable with two + characters at the end of its name, for example ITEM++, VIEW++ and so on.
2.Set the value of the variable to 0 if you want to start counting at 1, to 89 if you want to start counting with 90 and so on. (Always one less than the number you want to use, the value is always incremented whenever the variable is used.)
But how does that exactly work: "enter xxx as the variable's initial value when you define it"?
I tried things like <%TAB++=89%> or <%TAB=89%> but that didn't work.
And at "Configuration > Text variable" and "Task Manager > Publishing Task" the value is set to 0.